IR Smart Lab Oven
The IR Smart Oven is a patented product (Patent #6,648,486) designed to test your coatings and processes in your own facility. ITW BGK created the IR Smart Oven to provide valuable data to aid in the process development and support of your infrared curing customers. The oven is designed to provide an accurate and repeatable testing environment. |
![]() |
Manual | ![]() |
Enter desired % power output for the heaters. The start and stop buttons turn the heaters on and off. |
Time/Power | ![]() |
Enter desired % power output and the desired amount of time. The temperature the panel achieves is the variable (up to 20 steps possible). |
Power/Temp | ![]() |
Enter desired % power output and the desired panel temperature. The time it takes the panel to reach temperature is the variable (up to 20 steps possible). |
Time/Temp | ![]() |
A PID control algorithm ramps the part temperature to set-point via operator defined maximum power output rate (slow or fast). The power output required to maintain part temperature is the variable (up to 20 steps possible). |
Smart Logger (Optional)
The IR Smart Oven can be equipped with the Smart Logger. This allows for creation of data files to store and/or print test data.
Additional Features
· Built-in Pyrometer Temperature Sensor (calibration panels included)
· Pre-Mounted Exhaust Blower
IR Smart Specifications
· Size 43.25" W × 54.81" H × 33.0" D (1099mm×1392mm×838mm)
· Weight 425 pounds (193 Kg)
· Test Panel Size 10" × 14" (254mm × 356mm) Maximum
· Heat Zones Top and Bottom (controlled independently)
· Operating Modes Manual o Time/Power o Power/Temp o Time/Temp
· Power 480 / 3Ø / 60 Hz o 44 amps o 28 kW (alternate voltages available)
· Lamps (24) 1550 T3 Short-Wave o 290 volt
· Product Temperature 500°F (high temperature options available)
|