T-AGHV

Brand : DeVilbiss
Model : T-AGHV LVMP
Atomization Air Pressure : 0.4MPa (4.0kgf/cm²)
Fluid Pressure : 0.7MPa (7.0kgf/cm²)
Working Pressure : 0.35  0.7MPa (3.5  7.0kgf/cm²)
Weight : 510g
Fluid Inlet : R1/8
Cylinder Air Inlet (CYL) : R1/8
Atomization Air Inlet (CAP) : R1/8
Pattern Air Inlet (FAN) : R1/8
Measurement : L92 × W40 × H40mm

Quantity:

SGD 150.00

Product Details:

Comparing the existing Air Spray Gun or HVLP gun, LVMP gun makes higher transfer efficiency and better atomization possible with less air consumption.

Comparing the existing Air Spray Gun or HVLP gun

LVMP gun makes higher transfer efficiency and better atomization possible with less air consumption.

  • High Transfer Efficiency
  • Fine Atomization
  • Low Air Consumption

 

Why does LVMP have better transfer efficiency?

The difference of the transfer efficiency between standard spray gun and HVLP gun is the air velocity. The both air velocities are in the same sound-speed area when an instant of coming out from the air cap. However, when it becomes the distance of approximately 200mm, it generates large difference.

Therefore, if the velocity is low at 200mm distance, the transfer efficiency becomes better even atomized with higher air pressure than HVLP.

Gun Types:

Gun Types

Gun Inlet Pressure

Air Cap Pressure

Air Consumption

Air Velocity

Transfer Efficiency

AGXV-541-5805-DFX (LVMP Gun)

0.25MPa

0.20MPa

280L/min

16m/sec.

74%

AGXV-541-46-FX (HVLP Gun)

0.45MPa

0.09MPa

750L/min

19m/sec.

55%

AGX-550-777-FX (Standard Gun)

0.40MPa

0.35MPa

500L/min

22m/sec.

44%

(Spray Distance=200mm)

 

Specifications:

Atomization Air Pressure (Gun Inlet)

0.4MPa (4.0kgf/cm²)

Fluid Pressure

0.7MPa (7.0kgf/cm²)

Working Pressure

0.35 0.7MPa (3.5 7.0kgf/cm²)

Weight

510g

Fluid Inlet

R1/8

Cylinder Air Inlet (CYL)

R1/8

Atomization Air Inlet (CAP)

R1/8

Pattern Air Inlet (FAN)

R1/8

Measurement

L92 × W40 × H40mm

 

Air Cap, Fluid Tip Selection

Fluid Tip Size

Air Cap No.

805

807

805MT

GD (0.7mm)

G (0.7mm)

DFX (1.1mm)

FX (1.1mm)

DFW (1.6mm)

Spray Pattern
(Spray Distance=200mm)

220mm
(DFX)

300mm
(DFX)

180mm
(FX)